2006 Bobst SPeria 102 Foilmaster - Made in Switzerland & available Immedeately

1 BOBST SPERIA FOILMASTER 102  (Hot foil stamping)

Year 2006 - Machine No. 0532 110 06 - 32’600 running hours

Sheet size max 1020 x 720 mm - Sheet size min 400 x 350 mm

Embossing and stamping 1010 x 708 mm - Max. cutting strengths 250 T

Up to 7,500 sheets per hour, embossing and stamping - C.U.B.E. (Control Unit Bobst Electronic) - Manual non-stop feeder with antistatic device for paper or synthetics

Sensor-less double sheet detector - 1 pull side lay mark o.s. and o.o.s. - Independent heating zones - Honeycomb chases - 2 Stamping plates - Centerline - Micrometric device

Foil break control system for 8 foils - Nonstop delivery by apron - 410 mm elevated - Platform

AUXILIARY FOILMASTER EQUIPMENT

Foil Supply Module is equipped with 2 transversal advance shafts for 250mm (D-250mm) diameter foil reels. (J-5)

1 Additional foil driving device, "non-motorized", D-250mm

Including: 1 driving belt (30 mm wide), 1 automatic belt  - tensioning system, 1 set of reel holder with 1" and 3" hubs,  - 1 set of foil reel supports. - Maximum reel diameter 250 mm; minimal width 35mm. - Up to 6 driving devices maximum per shaft. - 8 units are provided with the standard equipment - (J-6)

Independent foil driving system, "motorized",  D-250mm

Including: 1 individual electronically controlled motor, 1 automatic belt tensioning system, 1 driving belt (30 mm wide), 1 set of reel holder with 1" and 3" hubs and 1 set of foil reel supports.

Maximum reel diameter 250 mm; minimal foil width 35mm. Machine's electronic controls can manage a maximum of 6 different advances (shafts) during production. (J-13)